Epson Surecolor P906 Optional Roll Paper Unit

SC-P906.1

This optional accessory enables the use of roll-based media in widths from 13 Inch to 17 Inch supplied on either a 2 Inch or 3 Inch core. It attaches to the rear of the printer and supports a range of media types with prints made borderless or with borders. 

• Accepts Roll Media From 330 - 432mm Wide
• Works with Rolls up to 30m Long
• Compatible with 2 Inch & 3 Inch Core Sizes

Prints up to a maximum length of 3.3m can be made however accurate sizing cannot be guaranteed for prints over 1.1m. A minimum of 50mm will be lost at the start of each print job and a further 14mm at the end of each print job due to media feed requirements. If multiple images are sent to print as a single job border between the images can be reduced to as small as 0mm.

The printer does not include an auto-cutter so manual cutting is required. When printing on matte media resolution is restricted to a maximum of 1440x720dpi.

Media with a weight of LESS THAN 250gsm may only be used if mounted on a 2 Inch core. If such media is used on a 3 Inch core it can damage the printer and invalidate the warranty.

This Epson Surecolor P906 Optional Roll Paper Unit comes with a full Australian warranty from Epson Australia.

Pop into our Gold Coast camera store & warehouse or order online. Cameras Direct, happily helping you take a better photo and being at your service. Thank you.