Wimberley Gimbal Head Platform - SP-WH-001

SP-WH-001

The Wimberley Head Version II Platform attaches easily to the Gimbal Swing Arm. Can be purchased separately as a backup.

The Wimberley Platform Assembly can be used as a alternative quick-release and lens support mechanism on gimbal heads manufactured by Really Right Stuff, Custom Brackets, Benro and others with compatible vertical arms

This Platform should slide freely onto the Swing Arm when the platform’s wing knob is backed off to the end of its range (note: the knob is captive and should not back-off completely). The Platform should not slide on the Swing Arm once the wing knob is tightened firmly. There should be no need to over-tighten the wing knob.

Additional features: incorporated in the integrated quick-release clamp of the Platform are innovative features found on our other clamps. There is a captive screw in the end of the threaded stud of the clamp knob. This screw keeps the knob and internal workings of the clamp captive, which means that the knob will not unscrew entirely and the clamp will not come apart unexpectedly. You should never need to back the knob all the way off the clamp stud.

Two shallow, finger-shaped channels have been machined into the face of the Platform clamp from the ends, stopping just short of the center. These channels allow greater forward-backward adjustment when using the optional safety stop screws on Wimberley plates or other compatible quick-release lens plates that include this safety feature

TIP: when not in use, protect the Platform clamp knob from hard knocks and blows. During transport, we recommend closing the clamp jaws all the way, as well as covering the clamp knob with adequate padding or bubble wrap to prevent damage (bending) to the knob stud if it is dropped or jostled against another hard surface.

This Wimberley Gimbal Head Platform comes with a full Wimberley Australia warranty. Pop into our Gold Coast camera store & warehouse or order online. We look forward to being at your SERVICE.